Toshiba e-STUDIO206L Service Manual page 1520

Page
7-23 The replacement cycle for the e-STUDIO506 has been added.
7-25 The replacement cycle for the e-STUDIO506 has been added.
7-27 The replacement cycle for the e-STUDIO506 has been added.
7-29 e-STUDIO506 has been added.
7-31 The replacement cycle for the e-STUDIO506 has been added.
7-32 The replacement cycle for the e-STUDIO506 has been added.
e-STUDIO506 has been added.
"FR-KIT-4530" has been changed to "FR-KIT-4590".
7-51
"SCRAPER-470" has been changed to "SCRAPER-16X".
"FR-KIT-3000" has been changed to "FR-KIT-3020".
7-52 e-STUDIO506 has been added.
7-54 The overhaul timing for the e-STUDIO506 has been added.
8-19 The error code F140 has been added.
8-47 e-STUDIO506 has been added.
8-54 "CN305" has been changed to "CN316".
8-69 e-STUDIO506 has been added.
8-125 "Inverter" has been changed to "Inverter / LED board".
8-177 e-STUDIO506 has been added.
8-183 The contents of the troubleshooting for [F109_0] have been changed.
8-188 The troubleshooting for [F140] has been added.
8-265 e-STUDIO506 has been added.
8-267 e-STUDIO506 has been added.
8-269 "inverter" has been changed to "inverter / LED board".
8-282 e-STUDIO506 has been added.
9-3 e-STUDIO506 has been added.
"Main switch" has been changed to "Main power switch".
9-4
e-STUDIO506 has been added.
9-5 e-STUDIO506 has been added.
9-25 In "[L] Enable HDD encryption", the contents of step (3) have been changed.
11-1 "Engine ROM" has been added.
11-2 "Engine ROM" has been added.
11-7 e-STUDIO506 has been added.
11-11 e-STUDIO506 has been added.
11-15 "Main switch" has been changed to "Main power switch".
11-30 "Engine ROM" has been added.
11-33 "Engine ROM" has been added.
11-35 "Main switch" has been changed to "Main power switch".
11-36 "Engine ROM" has been added.
The Notes text has been deleted.
11-39 "* When the authentication screen appears, press [OK]. (Enter the password, if one has
been set.)" has been added.
"Since the update data for the MR-3021 and the MR-3022 differ, be sure to install the
11-41
correct." has been added.
11-43 The illustration for step (1) has been deleted.
11-45 The illustration for step (1) has been deleted.
11-49 In "[A] Update Procedure", the illustration for step (1) has been deleted.
11-51 In "[A] Checking the hole punch position", the illustrations for step (2) have been changed.
In "[B] Update Procedure", the contents and the illustrations for step (3) have been
11-52
changed.
11-57 The illustration for step (1) has been deleted.
11-62 In "[A] Update Procedure", the contents of step (16) have been changed.
Ver. 02 <2012.04.20>
Contents