Toshiba e-STUDIO206L Service Manual page 1478

Sub
05/08 Mode Element
element
08 Setting System User
mode interface
08 Setting System Data
mode overwrite
kit
08 Setting System Paper
mode feeding
e-STUDIO207L/257/307/357/457/507
Item Subitem Code
9236
9240
9248
Sub- Default Acceptable
Details
code value value
Default setting of print 1 1~4
menu
HDD data overwriting 3
type setting
Automatic feed 1 0~1
setting of tab paper
and insertion
sheet(Remote)
135
RAM Contents
SYS 1: Private print screen (Job list of log-in user is
displayed if user authentication is enabled.)
2: Hold print screen (Job list of log-in user is displayed if
user authentication is enabled.)
3: Private print screen (If the private print screen is
displayed when user authentication is enabled, user list
is displayed if user logs in as GUEST, and job list of
log-in user is displayed if user logs in as general user.)
4: Hold print screen (If the private print screen is
displayed when user authentication is enabled, user list
is displayed if user logs in as GUEST, and job list of
log-in user is displayed if user logs in as general user.)
* If user data department management (08-9264) is
changed from OFF to ON, the value in this code
changes from "1" to "2", and "3" to "4". The value does
not change if it is "2" or"4". Reset this value as
necessary when changing user data department
management (08-9264) from OFF to ON.
0-3 SYS Select the type of the overwriting level for deleting HDD
data. (This setting is enabled only when the GP-1070 is
installed.)
0: LOW
Standard overwriting method.
1: MEDIUM
More secure overwriting method than LOW. The
overwriting time is between LOW and HIGH.
2: HIGH
The most secure overwriting method. The overwriting
time is the longest.
3: SIMPLE
Simple overwriting method. The time for overwriting is
the shortest.
SYS 0: Disabled 1: Enabled
Proc Service
edure UI
1
1
1