Throttle Lever Check - KEEWAY 500ATV Service Manual

3. CHECKS & ADJUSTMENT

Throttle Lever Check

Check the free play of throttle lever
Free play: 3-5mm
Out of range: →Adjust
Loosen locknut of throttle cable
turn the regulator and adjust free play of
throttle lever
After adjusting, tighten locknuts and install
throttle cable sleeve
Replace with a new throttle cable if the specified free
play could not be acquired by adjusting the regulator
or if there is still stickiness with the throttle.
Replace with a new throttle cable if the specified
free play could not be acquired by adjusting the
regulator or if there is still stickiness with the throttle.
Adjusting the Speed Limiter
The speed limiter is to limit the opening of throttle
Check the maximum length of limiter screw thread
Maximum screw thread: a=12mm
Adjust with a cross driver.
Note:
For beginners, the speed limit should be fully tightened.
Drivers with certain skills may adjust
the throttle with speed limiter
Maximum length of screw thread is 14mm.
It is recommended to adjust the thread length to 3-5mm.
3-12