Brake Disc
Removal
Remove:
--Front wheel(→8-3)
--Brake caliper(→8-4)
--Front brake disc and wheel hub
--4 bolts from brake disc
--Brake disc
Inspection:
Brake disc thickness: <3mm →Replace
Installation
Install brake disc
Tightening Torque
Fixing bolt, brake disc:23-25N·m
Front Brake Master Cylinder
Disassembly
Remove Bolt 1, Bolt 2
Separate front brake master cylinder from handlebar
Do not remove front brake master cylinder from
vehicle unless when replacing master cylinder
assembly.
NOTE:
Do not hang master cylinder on braking hose.
Do not put the master cylinder upside down to avoid
possible entrance of air into brake system.
Keep the master cylinder in the installation position
and fix it to the handlebar.
Refer to Chapter 1 for proper routing of brake hose.
Check brake efficiency after installation.
8. FRONT WHEEL, FRONT BRAKE,SUSPENSION,STEERING
8-5
8