Rear Axle Assembly And Adjustment - KEEWAY 500ATV Service Manual

Rear axle assembly and adjustment

Illustration
Tightening torque
Item" 1"
Item" 2"
Item" 12"
Item" 15"
Item" 20"
Item" 31"
Use glue for Item"29"assembly
Assembly clearance and adjustment of
drive bevel gear assembly rear axle.
a. Adjust installing by"24" thickness
b. Adjust gear clearance by choosing
" 6" thickness.
c. Inspect installing clearance by check-
ing bevel gear clearance.
Standard：0.1～0.2
e Keep installing point bearing clear-
ance 0.1～0.2 by choosing"8" thickness.
Adjust "6"
0.2 0.3 0.4
thickness
Adjust "8"
1.0 1.2 1.4 1.6 1.8
thickness
Adjust washer
"24"thickness
35Nm
25Nm
70Nm
25Nm
60Nm
16Nm
0.4 0.5 0.6
d. Drive bevel gear clearance measure ment
illustration(see above).Install measuring
tools,tightening torque(M14 ×1.25×60).Put up dial
indicator and make sure distance from indicator
point tomeasuringtoolcenteris22mm.Counter-clock
turn the toll and read the data.
10–14
10. FRONT/REAR AXLE