Replacing Bulb; Headlight Bulb; Disconnect Headlight; Inspection Of Headlight - KEEWAY 500ATV Service Manual

Replacing Bulb

Headlight Bulb

Warning
Headlight bulb will be very hot when it is turned on.
Do not touch it after it is just turned off.
Operation should be done when the bulb is cooled
down.
Remove headlight. (→10-5)

Disconnect headlight

Remove dust-proof cap, headlight connector, circlip
and replace with a new bulb.
Warning:
▲
Wear clean gloves when replacing bulb.
▲
Oil stains on the glass surface may cause
break of bulb. Clean the stained surface with
alcohol or isoamyl acetate.
▲
Make sure that the three pins of the bulb
should be in line with the three positioning
holes in the socket when replacing the bulb.
Bulb specification: 12V 35/35W
Reverse the removal procedure for installation.
After replacing the bulb, adjust headlight beam.

Inspection of Headlight

Turn the ignition switch to ON position, turn light switch
to the illuminating position and check if the headlight is
on.
—ON: Normal
—Still off: short circuit of main cable or broken
main cable
13. Lighting, Instruments, Switches
13-3
13