Appendix; Flight Planning; Creating A Flight Plan; Getting - Garmin GTN 725 Pilot's Manual

Method 2: Select a Nav/Com frequency using the numeric keypad
1. Touch the Standby window. A pull down keypad will appear
with the current Standby frequency highlighted.
2. Touch the numeric keys to add the desired values and touch
Enter to accept the displayed value and place it into the
Standby window.
3. Touching the XFER key will place the selected frequency directly
into the Active window.
To transfer the standby frequency to the active frequency
1. Touch the Active (top) frequency window.
Figure 1-21 Com Radio Frequency Windows (Touch Active to Flip/Flop)
2. Each touch of the Active window will flip/flop the Active and
Standby frequencies.
1.8

Flight Planning

1.8.1

Creating a Flight Plan

1. From the Home page, touch the Flight Plan key. The Active
Flight Plan page will be displayed.
2. If there is already an Active Flight Plan, touch Menu and then
the Delete key to clear the existing flight plan. If there is not
an Active Flight Plan, continue to the next step.
3. Touch Add Waypoint. Use the alphanumeric keypad to select
the Waypoint Identifier for the first leg in your flight plan and
then touch Enter.
4. Touch the next Waypoint Identifier field. Use the alphanumeric
keypad to select the Waypoint Identifier for the first leg in your
flight plan and then touch Enter.
190-01007-03 Rev. C
Active Com Frequency
(Touch to Flip/Flop)
Standby Com Frequency
GTN 725/750 Pilot's Guide
Foreword

Getting

Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols

Appendix

1-17
Index