Flight Id; Gdl 88 Ads-B Reporting; Wpt Info - Garmin GTN 725 Pilot's Manual

3. Touch the numeric keypad, or use the rotary knobs, to select
the desired Squawk Code.
4. Then, touch Enter or press the small right knob.
5. The selected Squawk Code will be shown in the XPDR window
at the top of the display.
2.1.9

Flight ID

1. While viewing the transponder page, touch the Flight ID key.
2. Touch the numeric keypad, or use the rotary knobs, to select the
desired Flight ID number and then press Enter. The selected
number will be shown in the Flight ID key.
2.1.10

GDL 88 ADS-B Reporting

One of the features of the optional GDL 88 is to send Automatic Dependent
Surveillance – Broadcast (ADS-B) position reports for enhanced situational
awareness. The GDL 88 is a remote-mount module that communicates with
panel-mounted avionics for traffic and weather display, and for equipment
control. The GDL 88 receives position information from the GTN GPS receiver.
The display and control of the information sent depends on the equipment
installation and configuration by the installer. Some installations allow control
by the pilot of the information sent, while others do not.
The Anonymous Mode, when armed, will replace the Flight ID with a
temporary randomized number for privacy while the position information will
still be provided. The call sign will be sent as "VFR." To enable Anonymous
Mode, the Squawk Code must be set to the VFR code (based on the GDL 88
configuration) and the Anonymous key must be selected.
190-01007-03 Rev. C
Figure 2-9 Selected XPDR Squawk Code
GTN 725/750 Pilot's Guide
Squawk Code Character
Selected For Editing
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts

Wpt Info

Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
2-5
Index