Troubleshooting; My Device Is Not Acquiring Satellite Signals; My Device Does Not Connect To My Phone; Appendix - Garmin TREAD Owner's Manual

My device is not acquiring satellite signals

• Take your device out of parking garages and away from tall buildings and trees.
• Remain stationary for several minutes.

My device does not connect to my phone

• Select > Phone, and verify that your phone is paired with the navigator.
• Enable Bluetooth wireless technology on your phone, and bring your phone within 10 m (33 ft.) of the device.
• Verify your phone is compatible.
Go to www.garmin.com/bluetooth
• Complete the pairing process again.
To repeat the pairing process, you must unpair your phone and device
page 29), and complete the pairing process

Garmin PowerSwitch

Garmin strongly recommends having an experienced installer with the proper knowledge of electrical systems
install the device. Incorrectly wiring the power cable can result in damage to the vehicle or the battery and can
cause bodily injury.
You can use a connected Garmin PowerSwitch device to control lights, fans, and more from your Tread device.

Mounting Considerations

• The device must be mounted close to the battery and within the range of the supplied power cable.
• The mounting surface must be strong enough to support the weight of the device.
• The location must allow room for the routing and connection of all cables.
48

Troubleshooting

for more information.
(Pairing with Your Smartphone,

Appendix

WARNING
(Disconnecting a Bluetooth Device,
page 26).
Troubleshooting