Adding A Waypoint To The End Of An Existing Flight Plan; Removing A Waypoint From An Existing Flight Plan; Creating A Flight Plan Without An Existing Flight Plan - Garmin GTN 725 Pilot's Manual

9.3.3.2
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
9.3.3.3
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain 9.3.3.4
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
9-34
Index

Adding a Waypoint to the End of an Existing Flight Plan

1. Touch the Map page display. The Map Mode selection keys
will appear. Touch the Graphically Edit FPL key.
2. Touch a waypoint that you want to add to the end of the flight
plan.
3. Touch the Done key to accept the changes and return to the
Map page.

Removing a Waypoint from an Existing Flight Plan

1. Touch the Map page display. The Map Mode selection keys
will appear. Touch the Graphically Edit FPL key.
2. Touch a waypoint, or airway, on the flight plan that you want
to remove.
3. Drag the flight plan line away from the waypoint, or airway,
and release the line. The waypoint, or airway, will be removed
from the flight plan.
4. Touch the Done key to accept the changes and return to the
Map page.

Creating a Flight Plan Without an Existing Flight Plan

1. Touch the Map page display. The Map Mode selection keys
will appear. Touch the Graphically Edit FPL key.
2. Touch a waypoint on the map to set the first waypoint in the
flight plan. If there are several nearby waypoints, touch the
desired waypoint to select it.
Figure 9-39 Select the Desired Waypoint From Multiple Waypoints
Touch Desired Waypoint
Cluster Of Nearby
Multiple Waypoints
GTN 725/750 Pilot's Guide 190-01007-03 Rev. C