Graphically Edit Flight Plan Mode; Adding A Waypoint Within An Existing Flight Plan - Garmin GTN 725 Pilot's Manual

9.3.3
Foreword
The Edit Flight Plan Mode allows making quick changes to the active flight
plan directly on the display. The process is simply touching the display to start
Getting
Started
Map Pan Mode, touching the Graphically Edit FPL key, dragging the desired
leg to a new waypoint or airway, and touching the Done key. At any point, a
Audio &
Xpdr Ctrl
step may be removed by touching the Undo key or the whole process ended by
touching the Cancel key. The Undo key will remove up to nine steps.
Com/Nav
9.3.3.1
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
9-32
Index

Graphically Edit Flight Plan Mode

Adding a Waypoint Within an Existing Flight Plan

1. Touch the Map page display. The Map Mode selection keys
will appear. Touch the Graphically Edit FPL key.
Figure 9-35 Edit Flight Plan Mode
2. Touch and hold the desired leg of the flight plan.
Figure 9-36 Select Leg of Flight Plan to Change
GTN 725/750 Pilot's Guide
Active Flight Plan
Map Pointer Where
Display Was Touched
Touch Edit Flight Plan
Key To Change FPL
Touch To Return To
The Map Display
Current Active
FPL Waypoints
Active Flight Plan Leg
Intended New Waypoint
Touch To Cancel
Changes And Return
To Map Display
190-01007-03 Rev. C