12.4.2
Configuring Weather Radar Page
To configure the WX Radar page, the Radar Mode must be in Ground,
Weather, or Test mode. When one of these modes is selected, a warm-up
period is initiated (countdown is displayed on the screen). After the warm-up is
complete, the selected mode will be available.
1. While on the ground, touch MODE.
2. In the Weather Radar Mode window, touch STANDBY.
3. Touch MODE and select Weather, Ground, or Test. A caution
window is displayed.
Figure 12-57 Caution for Radar Activation Confirmation
4. Touch OK to acknowledge the selected mode will be activated.
If Weather or Ground is selected, a warm-up period is initiated
(countdown is displayed on the screen). After the warm-up is
complete, the radar begins transmitting.
190-01007-03 Rev. C
Figure 12-56 Weather Radar Mode Selection
GTN 725/750 Pilot's Guide
Touch the Desired Mode
12-45
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index