Table of Contents
Advertisement
Invacare® SB® 910
Locking functions
When a function is locked with the ACO the
corresponding button on the hand control (HB75)
can not be used.
1. Press and hold the control button
2. Press the wanted function
3. The LED on the padlock
is locked.
4. Check that the corresponding hand control button is
deactivated.
5.5 Backup Battery
The bed is equipped with a built-in backup battery.
WARNING!
Risk of explosion
Old or faulty batteries may generate an explosive
gas mixture during charging.
– The battery box is provided with vents to
ensure adequate ventilation of the box. Do not
block or cover the vents, as this may result in
pressure built-up and the risk of explosion.
IMPORTANT!
Low battery capacity
– When the battery only has capacity left for one
more lifting cycle, the control unit will make an
audible sound, when using the hand control.
Charging the batteries
The batteries are charged when the control unit is connected
to the mains.
•
The control unit must be connected to the mains
for 24 hours prior to first use.
•
Batteries are not damaged by continuous
connection to the mains.
Preventive maintenance
Batteries must be charged, at least, every 6 months for
maintenance purposes.
We recommend the batteries to be tested at least once a
year.
Frequent, sudden discharges reduce the lifetime of
the battery.
5.6 Castors and central brake systems
CAUTION!
Risk of trapping/squeezing
All brakes are foot-operated.
– Do not release the brake with the fingers.
CAUTION!
Risk of injury
User can fall, while entering or exiting the bed, if
brakes are not locked.
– Always lock the brakes before the user is
moving in or out of bed or when attending to
the user.
12
lights up when the function
Castors might make marks on different types of
absorbing floor surfaces - such as untreated or
badly treated floors. To prevent marks, Invacare®
recommends to place a suitable kind of protection
between the castors and the floor.
5.6.1 Central brake system
All the wheels are locked by locking one of the pedals.
Always stand in the middle of the bed's long side
when locking the brakes.
A
5.7 Neck rest
The neck rest is manually operated.
UP
Lift up the neckrest A until it reaches the preferred position
and release.
1. Lock the brakes:
Step on the red pedalB.
1. Unlock the brakes:
Step on the green pedal
A until the brake is in
neutral position = Both
pedals on the same
level.
1568774-H
Advertisement
Table of Contents
