Notes On The Power Supply - Epson SC-P5000 SERIES User Manual

SC-P5000 Series User's Guide
Do not sit on the product or place any heavy objects on the product.
Pay particular attention in houses with children. The printer could tip over or break and cause an injury.
Do not put your fingers near the paper roller section when the printer is on or when it is printing.
If your fingers are caught in the paper roller, an injury could occur. Only handle the paper after it has been ejected completely.
When transporting or storing the product, be sure that it is level: do not tilt it at an angle or place it
upside down.
Ink could leak.
Do not forcefully remove the paper if it is jammed. Additionally, do not work in an unstable position.
The force of suddenly removing the paper could cause injury.
Do not store the cutter within the reach of children.
The cutter's blade could cause an injury.
Pay careful attention when replacing the cutter.
Be careful not to trap your hands or fingers when opening or closing the roll paper cover.
Failure to observe this precaution could result in injury.
When connecting cables or optional accessories, make sure they are installed in the correct direction and
that you follow the procedures exactly.
A fire or an injury could occur. Install the printer correctly by following the instructions in the manual.
When moving the product, make sure it is turned off, the power cable is unplugged from the outlet, and
all connecting cables have been removed.
If cables are damaged, an electric shock or fire could occur.

Notes on the Power Supply

Make sure the blades on the plug are inserted completely into the power outlet.
An electric shock or fire could occur.
Unplug the plug regularly and clean between the blades and around the base of the blades.
If the plug is plugged in for an extended period of time, dust collects around the base of the blades and a short circuit or fire
could occur.
When unplugging the plug, grip the plug itself; do not pull the power cable.
If the cable is damaged or the plug is deformed, an electric shock or fire could occur.
Do not insert or unplug the plug with wet hands.
An electric shock could occur.
Use only the type of power source indicated on the printer's label.
An electric shock or fire could occur.
Do not use the plug if any foreign objects such as dust have adhered to the plug.
An electric shock or fire could occur.
Do not use any other power cables except for the cable supplied with the printer. Also, do not use the
power cable supplied with the printer for any other devices.
An electric shock or fire could occur.
Introduction
Caution
Warning
8