Before Printing On Commercially Available Paper - Epson SC-P5000 SERIES User Manual

SC-P5000 Series User's Guide
Supported paper widths for borderless printing (roll paper)
A4/210 mm
A3/297 mm
Super A3/B/329 mm
SuperW A3/329 mm
* You can only perform borderless printing when using the borderless printing spacer supplied with the printer
and when you have loaded the roll paper with a 2 inch core.
"Removing and installing the spacer" on page 32
U
Supported paper widths for borderless printing (cut sheets)
A4/210 mm
A3/297 mm
Super A3/B/329 mm
When using the Epson Color Calibration Utility
Even if the specified conditions are met, you cannot use the following paper types.
❏ Paper that is thin and soft (plain paper and so on)
❏ Paper with an uneven print surface
❏ Paper that is colored or transparent
❏ Paper on which ink blurs or overflows when printing
❏ Paper which bends seriously during loading and printing
When performing color calibration for multiple printers, you can only use cut sheets A3 size or larger.
For one printer, you can use A3 size or larger roll paper as well as cut sheets.

Before Printing on Commercially Available Paper

Note:
❏ Be sure to check the paper characteristics (such as if the paper is glossy, the material, and the thickness) in the
manual provided with the paper or contact the dealer of the paper.
❏ Test the print quality with this printer before purchasing a large amount of paper.
When using non-Epson media (Custom Paper), make the paper configuration according to the paper
characteristics before printing. Printing without making configuring may cause wrinkles, rubbing, uneven colors,
and so on.
Make sure you set the following three items.
Appendix
*
A2/420 mm
*
11 inch
17 inch
*
8 inch
SuperW A3/329 mm
17 inch
10 inch
174
10 inch
16 inch
300 mm/11.8 inch
16 inch
300 mm/11.8 inch