Epson SC-P5000 SERIES User Manual page 24

SC-P5000 Series User's Guide
❏ Avoid touching the printable surface of the paper
with your bare hands. Moisture and oils from
your hands can affect print quality.
❏ Handle roll paper by holding the edges. We
recommend wearing cotton gloves.
❏ Cut sheets may be wavy or curled if the
temperature and humidity change. Be careful not
to scratch or soil the paper, and flatten it with
your hand before loading it in the printer.
❏ Do not wet the paper.
❏ Do not throw away the paper packaging as you
can use it for storing the paper.
❏ Avoid locations that are subject to direct sunlight,
excessive heat, or humidity.
❏ Keep cut sheets in their original package after
opening, and keep them in a flat place.
❏ Remove roll paper that is not in use from the
printer. Rewind it correctly and then store it in
the original packaging that came with the roll
paper. If you leave the roll paper in the printer for
a long time, its quality may decline.
Notes on handling printed paper
To maintain long lasting, high quality print results,
note the following points.
❏ Do not rub or scratch the printed surface. If they
are rubbed or scratched, the ink may peel off.
❏ Do not touch the printed surface; Failure to
observe this precaution may cause ink to rub off.
❏ Make sure the print outs are completely dry
before folding of stacking; otherwise, the color
may change where they touch (leaves a mark).
These marks will disappear if they are separated
immediately and dried; however, they will remain
if not separated.
❏ If you put the print outs in an album before they
are completely dry, they may be blurred.
❏ Do not use a dryer to dry the print outs.
❏ Avoid direct sunlight.
Introduction
❏ Prevent color distortion while displaying or
storing the print outs by following the
instructions in the paper's documentation.
Note:
Typically, print outs and photos fade over time (color
distortion) due to the effects of light and various
constituents in the air. This also applies to Epson
special media. However, with the correct storage
method, the degree of color distortion can be minimized.
❏ See the documentation supplied with Epson special
media for detailed information on handling the
paper after printing.
❏ The colors of photos, posters, and other printed
materials appear different under different lighting
conditions (light sources
from this printer may also appear different under
different light sources.
* Light sources include sunlight, fluorescent light,
incandescent light, and other types.
24
*
). The colors of print outs