Spectroproofer; Network Setup - Epson SC-P5000 SERIES User Manual

SC-P5000 Series User's Guide
Item
Total Prints
Print Job Information

SpectroProofer

Item
SProofer Status Device Version:ILS
Calibration Tile S/N
Device Temperature
Firmware Version
Air Temperature
Backing Color
Calibration Status

Network Setup

You can make settings for the network connection. After setting the items, press the l button to return to the
previous screen. The network is reset and a network connection is available after 40 seconds. This setting is not
displayed while resetting. Also, you cannot execute Print Status Sheet without doing a restart.
* Default setting
Item
Network Settings
IP Address Setting
IP, SM, DG Setting
Print Status Sheet
Init Network Setting
Using the Control Panel Menu
Description
You can see the total number of pages you have printed (up to 6 figures).
You can print the job information saved in the printer (up to 10 jobs).
Description
*
The following items only appear when Show is selected.
Hide
Show
*
Select whether to use DHCP to set the IP address (Auto), or to set the
Auto
address manually (Panel). When you select Panel, the IP, SM, DG
Setting below is displayed.
Panel
You can set the IP address, Subnet Mask, and Default Gateway. Contact
your system administrator for detailed information.
Press the Z button to print a list of the Network Setup. Use this
information for a complete overview of network settings.
Press the Z button to restore all Network Setup content to default
values.
Description
Displays the version of the ILS installed on the mounter.
Displays the calibration tile serial number of the ILS installed on the
mounter.
Displays the temperature of the ILS installed on the mounter.
Displays the version of the mounter.
Displays the air temperature around the mounter.
Displays the backing colors installed in the mounter. If the color dif-
fers from the actual color, check the status of the backing and make
sure it is installed correctly. For details on installing the SpectroProof-
er Mounter 17, see the Setup Guide (booklet).
The status of the ILS calibration appears as Successful or Failed.
119