Poor Character Recognition During Ocr Scanning - Epson CX6500 Reference Manual

Poor character recognition during OCR scanning

Try adjusting the Threshold setting. See
information.
The printed image is larger or smaller than the original
The image size and resolution settings of your software determine the size of the printed image. Do not
use the size of the monitor image to judge the printed size.
Scanned images cannot be printed or come out garbled when
printed
Try one or more of these solutions:
Make sure the CX6500 is properly connected to the computer, correctly set up, and maintained.
Check that your software is properly installed and set up for the CX6500 (see your Start Here
sheet).
Images cannot be located properly in the Thumbnail preview
Try one or more of these solutions:
In the Preview window, create marquees on the area you want to scan, then scan.
In the Configuration dialog, adjust the thumbnail cropping area using the Thumbnail Cropping
Area slider.
Scanning Documents to Convert to Text Data (OCR)
[Top]
[Top]
[Top]
for more