A Line Of Dots Always Appears In The Scanned Image - Epson CX6500 Reference Manual

You cannot scan an image or you only get a few dots for the
scanned image
Try one or more of these solutions:
Make sure the document is placed on the document table of the CX6500.
Change the Threshold setting in the Image Control dialog box. Select Text/Line Art as the
Image Type, then change the Threshold setting in the Image Control dialog box.
The image does not look the same as the original
Try one or more of these solutions:
Try different image setting combinations on your scanner software.
Your software may not have sufficient color matching and color management features, or these
components may not be installed correctly. See the documentation that came with your software
and computer.
If you are importing an image file, make sure the file format is one your software can read. Also,
make sure the image settings of your software are appropriate for the type of scanned image.
A line of dots is always missing from the scanned image
Scanner sensor malfunction is indicated when a line is missing on both screen images and printouts.
Contact your dealer.

A line of dots always appears in the scanned image

If this happens on both your screen and printout, the document table may be dusty or scratched. Clean
[Top]
[Top]
[Top]