Scanning An Image - Epson CX6500 Reference Manual

Scanning / How to Scan

Scanning an Image

Turning on the CX6500
Placing your materials on the document table
Starting the software and scanning an image
EPSON Scan provides three modes for you to make any scanning settings; Full Auto Mode, Home
Mode, and Professional Mode. This section describes how to scan an image in the Full Auto Mode. The
Full Auto Mode lets you scan images using automatically-adjusted settings. For more details, see
Choosing a Scanning
Note:
You cannot scan an image with a size that exceeds the available memory or disk space. If you try
to scan the image, an alert appears on the screen.
Note for Macintosh users:
Most illustrations shown in this section are for Windows, so they may vary in appearance from
what actually appears on your screen. The instructions are the same, except as noted.
Caution:
Before starting the following steps, make sure that all the necessary software including EPSON
Scan has been installed. For details about how to install the software, see the Start Here sheet.
Turning on the CX6500
Before turning on the CX6500, make sure it is connected to your
computer.
Press the On button to turn on the CX6500. All mode lights flash, then the mode button for
the mode you used last lights, meaning it has completed its initialization.
Mode.