Positions of the variable loading floor
Fig. 117 Set variable loading floor to the upper position / variable loading
floor in upper position
Fig. 118 Set variable loading floor to the lower position / variable loading
floor in lower position
The variable loading floor can be set to the upper or lower position.
Set to the upper position
›
Lift the variable loading floor by the handle
pull towards you.
›
Lift the loading floor to the height of the roll-up luggage compartment cover
in the direction of arrow
until you hear the clicking sound and press for-
1
ward.
The space below the variable loading floor can be used for stowing objects, for
example, the removed roll-up luggage compartment cover
cross bars
» page
102, etc.
100
Using the system
» fig.
117about 20 cm high and
A
» page
97, roof
The maximum permissible load of the variable loading floor is 75 kg. For trans-
porting heavy loads, adjust the variable loading floor in the lower position
» fig.
118.
Set into the lower position
›
Check that the area below the variable loading floor is empty.
›
Lift the variable loading floor by the handle
in the direction of arrow
.
2
›
Pull the loading floor towards you in the direction of arrow
the bottom position, and push forward.
Fold together / fold out the variable loading floor
Fig. 119 Folding up variable loading floor / folded the variable cargo floor
to the upper position
›
To fold together, hold the variable loading floor on the handle
the direction of arrow
» fig.
119.
1
›
Fold up the variable loading floor by moving it in the direction of the arrow
.
2
Folding out takes place in reverse order.
The variable loading floor is folded together / out in the same way in the upper
and lower position.
» fig. 118
over the loading edge
A
until it sinks to
3
and lift in
A