Description; Adjusting The Ready Position - Skoda octavia Owner's Manual

Description

Fig. 174 Support the owing device / tow bar / key (version 1 and 2)

Read and observe on page 149 first.
The knee-joint bar is detachable and is located in the storage compartment for
the spare / emergency wheel.
The towing device is delivered with two key versions. The handling of the tow-
ing device is identical for both key versions. The difference is only in the key
version.
Support for the towing device/tow bar
13-pin power socket
1
Safety eye
2
Mounting recess
3
Cap
4
Dust cap
5
Ball rod
6
Operating lever
7
Lock cap
8
Trigger pin
9
Lock
10
Locking ball
11
Key - Variant 1
12
Key - Variant 2
13
Notice
If you lose the key, please get in touch with a specialist garage.
150
Driving
» fig. 174

Adjusting the ready position

Fig. 175 1. step: Key version 1 / key version 2

Read and observe on page 149 first.
The tow bar must be set prior to installation to the standby position
» page 151, Check the setting of the standby position.
1. step - applies to the key version 1
›
Remove the cap from the lock.
›
Insert the key into the lock so that its green marker points upward.
A
›
Turn key in the direction of arrow
A
» fig. 175.
1. step - applies to the key version 2
›
Remove the cap from the lock.
›
Insert key into the lock so that the key eyelet points downwards.
B
›
Turn key in the direction of arrow
B
wards » fig. 175.
Fig. 176
2. Step: Both key variants
so that the red mark points upwards
1
so that the key eyelet points up-
2
