52
PERIODIC SERVICE
BAdjusting Choke Cable
1. Move the choke lever to the OFF position.
(1) Choke lever
2. Push choke bracket in direction of arrow (A).
(1) Choke bracket
(2) Choke bracket cable
(3) Choke bracket cable sheath
(4) Bolt
3. If bracket can move in direction of arrow (A), loosen
the bolt and pull the choke lever cable and sheath in
the direction of arrow (A) until bracket can no longer
move in direction of arrow (A). Then tighten the bolt.
BAdjusting Throttle Cable
1. Move the throttle lever to the "FAST" position.
(1) Throttle lever
2. Make sure the throttle arm contacts the stopper bolt.
(1) Bolt
(2) Throttle lever cable sheath
(3) Throttle arm
(4) Stopper bolt
3. If not possible, loosen the bolt and pull the throttle
lever cable sheath in the direction of the arrow until
throttle arm contacts the stopper bolt. And then tighten
the bolt.
(P) "PULL"
(Q) "CONTACT"