Adjusting Throttle Cable - Kubota ZG222A Operator's Manual

6. When exchanging an old battery with new one, use a
battery of equal
"SPECIFICATIONS".
(For non-accessible maintenance-free type batteries.)
Maintenance-free, non-accessible batteries are designed
to eliminate the need to add water. Yet the volume of
electrolyte above plates may eventually become depleted
due to abnormal conditions such as high heat or improper
regulator setting. Use a voltmeter to check the state of
charge. (See reference chart below to determine if
charging is necessary.)
Battery voltage Reference state of charge
12.6
12.4
12.2
12.0
11.8
specification shown in
100% (Full charge)
75%
50%
25%
0%
PERIODIC SERVICE
BAdjusting Throttle Cable
1. Move the throttle lever to the top position.
(1) Throttle lever
2. Make sure a part (2) is touching the restricting bolt (1).
(1) Restricting bolt
(2) Part
(3) Bolt
(4) Throttle lever cable
3. If not, loosen the bolt (3) and pull the throttle lever
cable (4) in direction of the arrow (A) so that the part
(2) would touch the restricting bolt (1).
And then tighten the bolt (3).
61
(A) "PULL"