Dismounting The Mower Deck - Kubota Z723 Operator's Manual

DISMOUNTING THE MOWER DECK

To avoid serious injury:
A Push the mower deck lift pedal with enough
force. If the force is not enough, the mower link
will jump up when the
is removed from the right side of the machine
due to the power of the spring. Keep all hands
and feet clear of the mower links during this
time.
1. Adjust the cutting height control dial to 25.4 mm (1 in.)
position with the machine placed on the board.
(1) Board
(2) Mower lift pedal
2. Adjust the anti-scalp rollers to 25.4 mm (1 in.) position.
(See "ADJUSTING
"OPERATING THE MOWER" section.)
3. Put a 14 mm (0.55 in.) x 150 mm (6 in.) shaft in the
hole of the rear right side lift link.
(1) Shaft ( 14 mm (0.55 in.) x 150 mm (6 in.))
(2) Clevis pin
(3) Lift link
4. Remove the mower belt.
5. Remove 4 clevis pins mounting the mower deck.
14 mm (0.55 in.) shaft
(P) "PUSH"
CUTTING HEIGHT" in
MOWER MOUNTING
6. Push the mower lift pedal toward the seat and remove
the 14 mm (0.55 in.) shaft from the hole in the rear
right side lift link.
7. Slowly let the mower lift pedal move to the full up
position.
8. Slide the mower deck from under the machine to the
right side of it.
11