Mower Mounting; Mounting The Mower Deck - Kubota Z723 Operator's Manual

8

MOWER MOUNTING

MOWER MOUNTING

MOUNTING THE MOWER DECK

To avoid serious injury:
A Park the machine on a firm and level surface.
A Apply the parking brake.
A Stop the engine and remove the key.
A Fix mower link at 25.4 mm (1 in.) position.
1. Before mounting the mower deck, raise the lift links to
the full up position.
2. Adjust the cutting height control dial to 1 in. position.
3. Adjust the anti-scalp rollers to 25.4 mm (1 in.) position.
(See "ADJUSTING
"OPERATING THE MOWER" section.)
4. Go backward so that right and left front tires would be
on the board 38.1 mm (1.5 in.) high.
H: 38.1 mm (1.5 in.)
A Use a board more than 133 mm (5.25 in.) wide and
1600 mm (63.0 in.) long.
A Make sure that right and left front tires are firm on the
board.
CUTTING HEIGHT" in
W: 133 mm (5.25 in.)
5. Make sure the direction of the front tires is as shown in
the figure.
H: 38.1 mm (1.5 in.)
L: 1600 mm (63.0 in.)
6. Place the mower deck at the right side of the machine.
7. Slide the mower deck under the machine, then lower
mower lift links.
W: 133 mm (5.25 in.)