Parking; Transporting - Kubota Z723 Operator's Manual

26 OPERATING THE MACHINE

PARKING

TO LOCK:
Depress the parking brake pedal firmly with the left
side of your right foot. Keeping the parking brake pedal
depressed, use the right side of your right foot to
depress the parking brake lock pedal. Then release
the parking brake pedal while holding the parking
brake lock pedal down. Then release the parking
brake lock pedal.
TO UNLOCK:
Depress the parking brake pedal and release slowly
with your right foot, without pressing the parking brake
lock pedal.
To avoid serious injury:
Before leaving the operator's position,
A Apply parking brake.
A Lower all implements to the ground.
A Shut off the engine.
A Remove the key.
A Place the motion control levers in the
"NEUTRAL LOCK" position.
If necessary to park on an incline, be sure to chock the
wheels on the downhill side to prevent accidental rolling of
the machine.
(1) Chocks

TRANSPORTING

1. Transport the machine on a trailer.
A Turn the fuel valve to the "OFF" position.
A Fasten the machine to the trailer.
2. Do not attempt to tow this machine, or damage to the
transmission may result.
3. When trailering the machine over a long distance:
A Move the mower lock lever to the "UNLOCK"
position.
A Make sure to lower the mower to the 25.4 mm (1
in.) cutting height by using the mower lift pedal.
4. When transporting the machine under its own power:
A Move the mower lock lever to the "LOCK" position.
A Make sure to lift the mower to the "TRANSPORT"
position by using the mower lift pedal.
(1) Mower lock lever : "LOCK"
: "UNLOCK"