To Raise The Rops To Upright Position; Adjustment Of Foldable Rops; Starting; Operator's Seat - Kubota Z723 Operator's Manual

20 OPERATING THE MACHINE
BTo Raise the ROPS to Upright Position
1. Remove both hair pins and lock pins.
(1) Lock pin
(2) Hair pin
2. Raise ROPS to the upright position.
To avoid personal injury:
A Hold the ROPS tightly with both hands and
raise the ROPS slowly and carefully.
3. Align lock pin holes, insert both lock pins and secure
them with the hair pins.
4. Tighten the knob bolts slightly.
To avoid personal injury:
A Make sure that both lock pins are properly
installed as soon as the ROPS is in the upright
position and secured with the hair pins.
(1) Lock pin
(2) Hair pin
(3) Knob bolt
BAdjustment of Foldable ROPS
A Adjust free fall of the ROPS upper frame regularly.
A If you feel less friction when folding the ROPS, tighten
the nut (1) until you feel the right friction in the
movement and then replace the hair pin.
(1) Nut

STARTING

1. Adjust the operator's position and
apply the seat belt.
BOperator's Seat
To avoid serious injury:
A Make adjustments to the seat only while the
machine is stopped.
A Make sure that the seat is completely secured
after each adjustment.
A Do not allow any person other than the driver to
ride on the machine.
(1) Armrest
(2) Seat slide lever