Tires And Wheels; Tires; Inflation Pressure; Wheels - Kubota Z723 Operator's Manual

32

TIRES AND WHEELS

TIRES AND WHEELS

TIRES

To avoid serious injury:
A Do not attempt to mount a tire. This should be
done by a qualified person with the proper
equipment.
A Always maintain the correct tire pressure.
Do not inflate tires above the recommended
pressure shown in the Operator's Manual.
To avoid serious injury:
A Never operate machine with a loose rim, wheel,
or axle.
A Whenever bolts are loosened, retighten to
specified torque.
A Check all bolts frequently and keep them
tightened.
BInflation Pressure
Though the inflation pressure is factory-set to the
prescribed level, it naturally drops slowly in the course of
time. Thus, check it everyday and inflate as necessary.
[Z725]
Tire sizes
13 x 6.5 - 6,
Front
(Non flat) Smooth
24 x 12 - 12,
Rear
(4PR) Turf
[Z724, Z723]
Tire sizes
13 x 5.0 - 6,
Front
(Non flat) Smooth
24 x 9.5 - 12,
Rear
(4PR) Turf
Recommended Inflation
Max. Pressure
---
69 kPa
(0.7 kgf/cm , 10 psi)
Recommended Inflation
Max. Pressure
---
69 kPa
(0.7 kgf/cm , 10 psi)
(1) Ground

WHEELS

A When re-fitting a wheel, tighten the wheel bolt to the
following torques then recheck after traveling 200 m
(200 yards) changing directions several times.
Wheels with beveled or tapered holes:
Use the tapered wheel nut.
(A) "INSUFFICIENT"
(B) "NORMAL"
(C) "EXCESSIVE"