Led Status; How To Purchase The Consumables - Ricoh SP 220NW Setup Manual

LED Status

: On
: Flashing (on for one second and off for one second)
Power Alarm
For details, see "Error and Status Indicate on the Control Panel", User's Guide.

How to purchase the consumables

For information about consumables, see the following website or scan the following QR code from your smart device.
LED
Toner / Paper End
- -
- -
-
-
-
-
-
http://www.ricoh.com/printers/
sp200/support/gateway/
Status
The power is on.
Importing data.
The print cartridge is almost empty.
• The print cartridge is empty.
• The print cartridge is not set correctly.
• The tray has run out of paper.
A paper jam has occurred in the
machine.
• The size of paper to print on and the
size of the paper loaded in the tray do
not match.
• A cover is open.
Another type of error has occurred.
A malfunction has occurred.
Solution
The status is normal.
The status is normal.
Replace the print cartridge before it
becomes empty.
• Replace the print cartridge.
• Set the print cartridge again correctly.
• Load paper into the tray.
Use Web Image Monitor or Smart
Organizing Monitor to determine where
the paper jam is, and then remove the
jammed paper.
• Use Web Image Monitor or Smart
Organizing Monitor to check the paper
size settings, and then change either the
size of paper to print on or the size of
paper loaded in the tray.
• Confirm that all the covers are closed
completely.
Use Web Image Monitor or Smart
Organizing Monitor to check the error, and
then take appropriate measures.
Contact your sales or service
representative.
9