Ethernet Module Configuration Using The Nncli; Roadmap Of Ethernet Module Nncli Commands - Nortel 8600 Configuration Manual

.
Ethernet module configuration using
the NNCLI
Configure an Ethernet port to ensure proper operation and optimum
performance of the port.
Navigation
•
"Roadmap of Ethernet module NNCLI commands" (page 47)
•
"Job aid: port-related configuration parameters" (page 49)
•
"Disabling a module" (page 51)
•
"Configuring 10/100/1000 Mbit/s ports" (page 52)
•
"Configuring 1 Gigabit Ethernet ports" (page 54)
•
"Configuring 10 Gigabit Ethernet ports" (page 57)
•
"Associating a port to a VRF instance" (page 60)

Roadmap of Ethernet module NNCLI commands

The following roadmap lists some of the IP commands and their
parameters that you can use to complete the procedures in this section.
Table 7
Job aid: Roadmap of Ethernet module NNCLI commands
Command
Privileged EXEC mode
Parameter
Nortel Ethernet Routing Switch 8600
Configuration — Ethernet Modules
NN46205-503 04.01 21 December 2009
Copyright © 2008-2009 Nortel Networks. All Rights Reserved.
47