Configuring An Aggregate Interface; Configuring The Description Of An Aggregate Interface - HP 5820X series Configuration Manual

To do...
1. Enter system view
2. Set the system LACP priority
3. Create a Layer 2 aggregate
interface and enter the Layer
2 aggregate interface view
4. Configure the aggregation
group to work in dynamic
aggregation mode
5. Exit to system view
6. Enter Layer 2 Ethernet
interface view
7. Assign the Ethernet interface
to the aggregation group
8. Assign the port an LACP
priority
9. Set the LACP timeout interval
on the port to the short
timeout interval (1 second)

Configuring an aggregate interface

Most configurations that can be performed on Layer 2 Ethernet interfaces can also be performed on Layer
2 aggregate interfaces.

Configuring the description of an aggregate interface

Configure the description of an aggregate interface for administration purposes such as describing the
purpose of the interface.
To configure the description of an aggregate interface:
Use the command...
system-view
lacp system-priority system-priority
interface bridge-aggregation
interface-number
link-aggregation mode dynamic
quit
interface interface-type interface-
number
port link-aggregation group
number
lacp port-priority port-priority
lacp period short
43
Remarks
—
Optional.
By default, the system LACP
priority is 32,768.
Changing the system LACP
priority may affect the
aggregation state of the ports in a
dynamic aggregation group.
Required.
When you create a Layer 2
aggregate interface, the system
automatically creates a Layer 2
static aggregation group
numbered the same.
Required.
By default, an aggregation group
works in static aggregation mode.
—
Required.
Repeat these two steps to assign
more Layer 2 Ethernet interfaces
to the aggregation group.
Optional.
By default, the LACP priority of a
port is 32,768.
Changing the LACP priority of a
port may affect the aggregation
state of the ports in the dynamic
aggregation group.
Optional.
By default, the LACP timeout
interval on a port is the long
timeout interval (30 seconds).