to use the 802.1p priority in incoming packets for priority mapping. For more information about this
command, see the ACL and QoS Configuration Guide.
Configuring a port to operate in automatic voice VLAN
assignment mode
To set a port to operate in automatic voice VLAN assignment mode:
To do...
1.
Enter system view
2.
Set the voice VLAN aging
time
3.
Enable the voice VLAN
security mode
4.
Add a recognizable OUI
address
5.
Enter Ethernet interface view
6.
Configure the port to operate
in automatic voice VLAN
assignment mode
7.
Enable voice VLAN on the
port
A protocol-based VLAN on a hybrid port can process only untagged inbound packets, whereas the voice
VLAN in automatic mode on a hybrid port can process only tagged voice traffic. Do not configure a
VLAN as both a protocol-based VLAN and a voice VLAN. For more information, see the chapter "VLAN
configuration."
Configuring a port to operate in manual voice VLAN
assignment mode
To set a port to operate in manual voice VLAN assignment mode:
To do...
1.
Enter system view
Use the command...
system-view
voice vlan aging minutes
voice vlan security enable
voice vlan mac-address oui mask
oui-mask [ description text ]
interface interface-type interface-
number
voice vlan mode auto
voice vlan vlan-id enable
Use the command...
system-view
143
Remarks
—
Optional.
1440 minutes by default.
The voice VLAN aging time
configuration is only applicable
on ports in automatic voice VLAN
assignment mode.
Optional.
Enabled by default.
Optional.
By default, each voice VLAN has
default OUI addresses configured.
For the default OUI addresses of
different vendors, see
Table
—
Optional.
Automatic voice VLAN assignment
mode is enabled by default.
The voice VLAN assignment
modes on different ports are
independent of one another.
Required.
Disabled by default.
Remarks
—
16.