Sip Trunk Setup - Draytek VigorIPPBX 3510 User Manual

2 . 3 . 2 S I P T r u n k
2 . 3 . 2 S I P T r u n k
This page allows you to set profiles for six SIP outside lines at one time.
Profile Name
Domain/Realm
Proxy
Account Number/Name
Password
Trunk Number
When you finish the settings of profile name, domain/realm, proxy, account number/name,
password and trunk number fields, please click OK to save them. The new added profile will
be displayed on the screen.
VigorIPPBX 3510 Series User's Guide
S e t u p
S e t u p
Type a name for this profile for identifying.
Set the domain name or IP address of the SIP Registrar
server.
Set domain name or IP address of SIP proxy server. By
the time you can type :port number after the domain
name to specify that port as the destination of data
transmission (e.g., nat.draytel.org:5065)
Enter your account name of SIP Address.
Type the password which will be used in registration
for SIP service for this profile.
There are two ways to dial outside lines for an
extension number. First, dial a short number and wait
for a while. When dial tone appears, please dial the
real outside line number. Second, dial a short number
and then the real outside line number without waiting
for dial tone. The short number is defined here as
Trunk Number.
24