Draytek VigorIPPBX 3510 User Manual page 186

Profile Name
Enable this profile
VPN Dial-Out Through
Netbios Naming Packet
VigorIPPBX 3510 Series User's Guide
Specify a name for the profile of the LAN-to-LAN
connection.
Check here to activate this profile.
Use the drop down menu to choose a proper WAN interface
for this profile. This setting is useful for dial-out only.
WAN1 First - While connecting, the router will use WAN1
as the first channel for VPN connection. If WAN1 fails, the
router will use another WAN interface instead.
WAN1 Only - While connecting, the router will use WAN1
as the only channel for VPN connection.
WAN2 First - While connecting, the router will use WAN2
as the first channel for VPN connection. If WAN2 fails, the
router will use another WAN interface instead.
WAN2 Only - While connecting, the router will use WAN2
as the only channel for VPN connection.
Pass – click it to have an inquiry for data transmission
between the hosts located on both sides of VPN Tunnel while
connecting.
178