Bandwidth Limit - Draytek VigorIPPBX 3510 User Manual

Maximum Sessions
Add
Edit
Delete
Index (1-15) in Schedule
Setup
5 . 7 . 2 B a n d w i d
5 . 7 . 2 B a n d w i d
The downstream or upstream from FTP, HTTP or some P2P applications will occupy large
of bandwidth and affect the applications for other programs. Please use Limit Bandwidth to
make the bandwidth usage more efficient.
In the Bandwidth Management menu, click Bandwidth Limit to open the web page.
To activate the function of limit bandwidth, simply click Enable and set the default upstream
and downstream limit.
Enable
Disable
VigorIPPBX 3510 Series User's Guide
Defines the available session number for each host in the
specific range of IP addresses. If you do not set the session
number in this field, the system will use the default session
limit for the specific limitation you set for each index.
Adds the specific session limitation onto the list above.
Allows you to edit the settings for the selected limitation.
Remove the selected settings existing on the limitation list.
You can type in four sets of time schedule for your request.
All the schedules can be set previously in Application –
Schedule web page and you can use the number that you
have set in that web page.
t h L i m i t
t h L i m i t
Click this button to activate the function of limit bandwidth.
Apply to 2
please check this box to apply to second subnet.
Click this button to close the function of limit bandwidth.
nd Subnet – if bandwidth limit function is enabled,
152