Bandwidth Limit - Draytek Vigor 2910 User Manual

Maximum Sessions
Add
Edit
Delete
Index (1-15) in Schedule
Setup
3 . 6 . 2 B a n d w i
3 . 6 . 2 B a n d w i
The downstream or upstream from FTP, HTTP or some P2P applications will occupy large
of bandwidth and affect the applications for other programs. Please use Limit Bandwidth to
make the bandwidth usage more efficient.
In the Bandwidth Management menu, click Bandwidth Limit to open the web page.
To activate the function of limit bandwidth, simply click Enable and set the default upstream
and downstream limit.
Enable
Disable
Default TX limit
Default RX limit
Vigor2910 Series User's Guide
d t h L i m i t
d t h L i m i t
Defines the available session number for specific range of IP
addresses. If you do not set the session number in this field,
the system will use the default session limit for the specific
limitation you set for each index.
Adds the specific session limitation onto the list above.
Allows you to edit the settings for the selected limitation.
Remove the selected settings existing on the limitation list.
You can type in four sets of time schedule for your request.
All the schedules can be set previously in Application –
Schedule web page and you can use the number that you
have set in that web page.
Click this button to activate the function of limit bandwidth.
Click this button to close the function of limit bandwidth.
Define the default speed of the upstream for each computer in
LAN.
Define the default speed of the downstream for each computer
in LAN.
81