Indicator Display Of The Machine Status And Solution - Sharp AL-1035-WH Operation Manual

INDICATOR DISPLAY OF THE
MACHINE STATUS AND SOLUTION
No
Toner cartridge replacement
required indicator
1
Drum cartridge replacement
required indicator
2 LED Indicator
LED Indicator
3
Misfeed indicator
Toner cartridge replacement
required indicator
4 Drum cartridge replacement
required indicator
Misfeed indicator
LED Indicator
5
Remaining
LED Indicator
copy count
LED Indicator
6
LED Indicator
7 LED Indicator
8 LED Indicator
Drum cartridge replacement
9
required indicator
Drum cartridge replacement
10
required indicator
LED Indicator
11
LED Indicator
One of the number
LED Indicator
( – )
12 Drum cartridge replacement
required indicator
Misfeed indicator
LED Indicator
LED Indicator
13
LED Indicator
LED Indicator
LED Indicator
LED Indicator
14
LED Indicator
LED Indicator
LED Indicator
LED Indicator
15
LED Indicator
LED Indicator
"100%" ratio Mode LED
16
– Other Indicator/LED
Indication Status, Cause and Solution
Toner cartridge or drum cartridge is not
Blinking
installed. Install toner cartridge and drum
together
cartridge.
The output tray is closed. Only scan function can
Blinking be used. To copy or print, please expand the
output tray.
Blinking Paper misfeed occurs. Remove the misfeed
together paper.
Blinking
Cover is open. Close the cover.
together
Blinking Continuous copying. The copy speed slows
in turn down for a while.
Blinking Continuous printing. The print speed slows
in turn down for a while.
Blinking Paper out. Feed paper and press the start key.
The toner is about to run out. Prepare the new
Light toner cartridge. By replacing the toner cartridge,
the counter will be cleared automatically.
The life of the drum cartridge is about to end.
Light
Preparing to replace the drum cartridge.
The life of the drum cartridge ends. The
machine stops working. Replace the drum
Blinking
cartridge, and the count of the drum cartridge
should be cleared.
Blinking
The loaded paper size is wrong. Press "C" key
one by
to clear the error.
one
Light
The machine is in ready status.
Off
Off
Rotate
Machine is transferring data.
in circle
Blinking USB access problem. Check if there is any
one by obvious damage sign. Or, replace the USB
one device.
Blinking
USB device is memory full. Check if there is
one by
memory space for storage.
one
Blinking Auto power shut off mode. To restore normal
operation, press any key.
Off
42
Page
45,46
15
41
41,45
–
–
15
45
46
46
7, 9
–
–
29
29
6