Operation Panel - Sharp AL-1035-WH Operation Manual

OPERATION PANEL

Alarm indicator
1
[ ] "Toner cartridge replacement required"
indicator(Page 45)
[ ] "Drum cartridge replacement required"
indicator(Page 46)
[ ] "Misfeed"
Density key (
2
It is used to adjust the MANUAL or PHOTO
exposure level.(Page 16)
3 Mode select key (
Press the mode select key (
ratio (100%, A5
and 2-in-1 mode.
4 LED indicator
It is used to indicate the number of copies, "out of
paper", "misfeed" and error code.
5 Copy Count key (
It is used to set the number of
Photo mode key (
6
Press the [PHOTO MODE] key (
image originals (e.g., photo).
Clear key ( )
7
It is used to clear the displayed number of copies
or to terminate a copying task. The total number
will be displayed if you press and hold this
key.(Page 6)
SCAN to USB key
8
Press this key to scan the originals to the USB
device (USB memory).
Copy Start key (
Press this key to copy start.
5
BEFORE USING THE MACHINE
indicator(Page 42)
)/Indicator
)
), you can select the
A4, A4 A5 and 50 %), ID MODE
(Page 17, Page 18, Page 19)
(Page 42)
)
copies.(Page 15)
)/Indicator
) to copy the
(Page 16)
(Page 29)
)
(Page 15)