Copies Are Smudged Or Dirty; A Copy Job Stops Before It Is Finished; Any One Of The Alarm Indicators; Is Lit Or Blinking - Sharp AL-1035-WH Operation Manual

Problem

Copies are smudged or dirty.

A copy job stops before it is
finished.

Any one of the alarm indicators

( , ,

) is lit or blinking.

Lighting fixture flickers.

Cause and solution
The document glass or the inside of the document cover
is dirty.
 Clean them regularly.
The original is smudged or dirty.
 Use a clean original.
Paper contains excessive moisture.
 Replace with dry copy paper.
Please refer to "CARTRIDGE CLEANING MODE".
The feed tray is out of paper.
 Load paper.
Please refer to "INDICATOR DISPLAY OF THE MACHINE
STATUS AND SOLUTION" to check the meaning of the
alarm indicator and error message, and take appropriate
actions.
The same power socket is used by the lighting fixture and
the machine.
 Connect the machine to a power socket which is not used by
other electric appliances.
35
TROUBLESHOOTING
Page No.
47
–
–
47
9
42
–