Sharp AL-1633 Operation Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. All in One Printer
  5. AL-1633
  6. Operation manual
Sharp AL-1633 Operation Manual

Sharp AL-1633 Operation Manual

Digital multifunctional system
Hide thumbs Also See for AL-1633:
Table of Contents

Advertisement

Quick Links

See also: Online Manual
AL-1633
AL-1644
MODEL
AL-1633
AL-1644
DIGITAL MULTIFUNCTIONAL
SYSTEM
OPERATION MANUAL
• BEFORE USING
THE MACHINE
• COPY FUNCTIONS
• PRINTER/SCANNER
FUNCTIONS
• USER SETTINGS
• TROUBLESHOOTING
• ROUTINE MAINTENANCE
• SUPPLIES
• APPENDIX
Page
8
21
32
36
45
64
68
70

Advertisement

Table of Contents
loading

Related Manuals for Sharp AL-1633

Summary of Contents for Sharp AL-1633

  • Page 1 MODEL AL-1633 AL-1644 DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUAL Page • BEFORE USING THE MACHINE • COPY FUNCTIONS • PRINTER/SCANNER FUNCTIONS • USER SETTINGS • TROUBLESHOOTING • ROUTINE MAINTENANCE • SUPPLIES AL-1633 • APPENDIX AL-1644...
  • Page 2 Do not make copies of anything which is prohibited from copying by law. The following items are normally prohibited from copying by national law. Other items may be prohibited by local law. G Money G Stamps G Bonds G Stocks G Bank drafts G Checks G Passports...

  • Page 3: Table Of Contents

    CONTENTS CAUTIONS..............................3 G CAUTIONS ON USING............................. 3 G IMPORTANT POINTS WHEN SELECTING AN INSTALLATION SITE ............3 G CAUTIONS ON HANDLING ..........................4 G CAUTIONS ON LASER ............................ 4 G ENVIRONMENTAL INFORMATION......................... 5 USING THE MANUAL ..........................5 G ABOUT THE OPERATION MANUALS......................5 G THE MEANING OF "R"...
  • Page 4 TROUBLESHOOTING APPENDIX TROUBLESHOOTING ........45 SPECIFICATIONS ........... 70 G MACHINE/COPYING PROBLEMS....46 G PRINTING AND SCANNING PROBLEMS ..49 SOFTWARE LICENSE ........73 INDICATORS AND DISPLAY MESSAGES ..53 MISFEED REMOVAL........54 INDEX .............. 75 G MISFEED IN THE SPF (only on the SPF model) ................54 G MISFEED IN THE BYPASS TRAY ....55 G MISFEED IN THE MACHINE......56...

  • Page 5: Cautions

    CAUTIONS Follow the cautions below when using this machine. CAUTIONS ON USING Warning: • The fusing area is hot. Exercise care in this area when removing misfed paper. • Do not look directly at the light source. Doing so may damage your eyes. Caution: •...

  • Page 6: Cautions On Handling

    The machine should be installed near an accessible power outlet for easy connection and disconnection. Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements. Also make certain the outlet is properly grounded. Connect the machine to a power outlet which is not used for other electric appliances.

  • Page 7: Environmental Information

    ENVIRONMENTAL INFORMATION ® As an NERGY Partner, SHARP has determined that this product meets ® NERGY guidelines for energy efficiency. USING THE MANUAL This machine has been designed to provide convenient copying features in a minimum amount of office space and with maximum operational ease.

  • Page 8: Conventions Used In This Manual

    This operation manual refers to the Single Pass Feeder as the "SPF". DIFFERENCES BETWEEN MODELS This manual covers the following models. Model AL-1644 AL-1633 Appearance The above illustration is used in instances where a function and/ or the operation of the machine is the same on both models.

  • Page 9: Main Features

    MAIN FEATURES High-speed laser copying • First-copy time* at 300 dpi* is only 7.2 seconds . • Copying speed is 16 copies per minute. This is ideal for business use and provides a big boost to workplace productivity. First-Copy time may vary depending on the power-supply voltage, ambient temperature, and other operating conditions. "dpi"...

  • Page 10: The Machine

    Chapter 1 BEFORE USING THE MACHINE This chapter contains basic information that should be read before using the machine. PART NAMES AND FUNCTIONS Document feeder cover (only on the SPF Paper trays model) /document cover (only on the document Each tray holds 250 sheets of paper. (p.17) cover model) Side cover Open to make copies from the document glass.
  • Page 11 BEFORE USING THE MACHINE are only on the SPF model. Parallel port Roller rotating knob Connect to your computer to use the printer Turn to remove misfed paper. (p.56, p.57) function. (Software Setup Guide) Fusing unit release levers Document feeder tray To remove a paper misfeed from the fusing unit, Place the original(s) that you wish to copy/scan push down on these levers and remove the paper.

  • Page 12: G Operation Panel

    BEFORE USING THE MACHINE OPERATION PANEL AL-1633 SCAN MENU key Alarm indicators Use to scan by means of the provided Button ] TD cartridge replacement required indicator Manager software. (p.34) (p.53) ] Drum cartridge replacement required SCAN key ( ) / indicator indicator (p.53)
  • Page 13 BEFORE USING THE MACHINE (Two-tray model only) ACC.#-C AUTO 25 400% INTERRUPT ZOOM 200% AUTO 100% EXTRA 1 3 5 AUTO ENTER 18 19 20 21 29 30 ORIGINAL SIZE ENTER key ( ) / ORIGINAL ] key ENTER SIZE indicators Use to check the total number of copies made (p.64).

  • Page 14: Checking Packed Components And

    CHECKING PACKED COMPONENTS AND ACCESSORIES Open the carton and check to ensure that the following components and accessories are included. Operation manual and software CD-ROM Power cord TD cartridge Drum cartridge (installed in machine) Machine • If anything is not included or is damaged, contact your authorised service representative. Note •...

  • Page 15: Set-Up

    SET-UP Remove all pieces of tape, then open Store the pressure plate lock which the SPF or the document cover and has been removed in step 5 and the remove the protective material. screw which has been removed in step 2 in the front of the paper tray. Use a coin (or other suitable object) to To store the pressure Pressure...

  • Page 16: Installing The Td Cartridge

    INSTALLING THE TD CARTRIDGE Push gently on both ends of the front Insert the TD cartridge along the cover and open it. guides until it locks in place. If there is any dirt or dust on the TD cartridge, remove it before installing the cartridge.

  • Page 17: Power On And Off

    POWER ON AND OFF The power switch is located on the left side of the machine. POWER ON POWER OFF Make sure that the machine is not in Turn the power switch to the "ON" operation and then turn the power switch position to the "OFF"...

  • Page 18: Loading Paper

    G G G G There are many varieties of special paper available on the market, and some cannot be used with this machine. Before using special paper, contact your authorised service representative. G G G G Before using other than SHARP recommended paper, make a test copy to see if the paper is suitable.

  • Page 19: G Loading Paper

    BEFORE USING THE MACHINE LOADING PAPER Make sure that the machine is not copying or printing, and then follow these steps to load paper. Loading the paper tray Gently lift and pull out the paper tray Gently push the paper tray into the until it stops.

  • Page 20: Loading The Bypass Tray

    • When loading envelopes, make sure that they are straight and flat and do not have loosely glued construction flaps (not the closure flap). • Special papers except SHARP recommended transparency film, labels, and envelopes must be fed one sheet at a time through the bypass tray.

  • Page 21: Changing A Tray's Paper Size Setting

    BEFORE USING THE MACHINE Envelopes Do not use the following envelopes, as misfeeds will occur. • Envelopes with metal tabs, clasps, strings, holes, or windows. • Envelopes with rough fibres, carbon paper, or glossy surfaces. • Envelopes with two or more flaps. •...
  • Page 22 BEFORE USING THE MACHINE Important points when using the printer mode Squeeze the lock lever of the front • Make sure that the tray's paper size setting is the guide and slide the front guide to same as the tray's paper size setting in the printer match the width of the paper, and driver.

  • Page 23: Copy Functions

    Chapter 2 COPY FUNCTIONS This chapter explains basic copying functions such as normal copying, reduction or enlargement, and exposure adjustment. NORMAL COPYING This section explains how to make a regular copy. If "Auditing mode" has been enabled (p.43), enter your 3-digit account number. Copying from the document glass Open the document cover/SPF, and Press the [ORIGINAL SIZE ENTER]...
  • Page 24 COPY FUNCTIONS Copying from the SPF (only on the SPF model) Make sure that an original has not Press the [START] key ( ) to begin been left on the document glass. copying. Close the SPF. The copy is delivered to the paper output tray.

  • Page 25: Removing The Document Cover

    COPY FUNCTIONS Auto paper select mode (Two-tray model only) When the AUTO PAPER SELECT indicator ( ) lights up, "Auto paper select mode" is enabled. This function AUTO automatically selects the paper that is the same size as the original A5, A4, A4R, B4, A3 paper. "Auto paper select mode"...

  • Page 26: G Making A Copy Darker Or Lighter

    COPY FUNCTIONS MAKING A COPY DARKER OR LIGHTER Automatic exposure adjustment is initially enabled. This function automatically adjusts the copy image according to the original being copied. If you wish to select the exposure level yourself, follow the steps below. (Select from two original types and five exposure levels for each original type.) The exposure level used in automatic exposure adjustment can also be changed.

  • Page 27: G Setting The Number Of Copies

    COPY FUNCTIONS SETTING THE NUMBER OF COPIES Press the numeric keys to set the number of copies. Important note when making a large number of copies The maximum number of copies can be changed in the user programs. (p.39) When the maximum number of pages (about 250 pages) that can be held in the paper output tray are output, copying will temporarily stop.

  • Page 28: G Manual Ratio Selection

    COPY FUNCTIONS Press the [AUTO IMAGE] key ( Set the number of copies and other AUTO copy settings, and then press the [START] key ( The AUTO IMAGE indicator ( ) lights The copy will be delivered to the paper output AUTO AUTO up and the appropriate...

  • Page 29: G Selecting The Vertical And Horizontal Copy Ratios Separately

    COPY FUNCTIONS SELECTING THE VERTICAL AND HORIZONTAL COPY RATIOS SEPARATELY (XY ZOOM copying) The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed independently. Example: Reduction only in the horizontal direction. Original Copy • To use the XY ZOOM feature with the DUAL PAGE COPY feature, set the DUAL PAGE COPY feature first and Note then the XY ZOOM feature.
  • Page 30 COPY FUNCTIONS Use the [PRESET RATIO] selector keys ( ) and [Zoom] keys ( to change the copy ratio in the horizontal direction. Press the [PRESET RATIO] selector keys ( ) to select a ratio close to the desired ratio, and then press the [Zoom] keys ( ) to adjust the ratio in increments of 1%.

  • Page 31: Tray

    TWO-SIDED COPYING USING THE BYPASS TRAY To perform manual two-sided copying, follow these steps. Example: Copying originals A and B onto each side of one sheet of paper Original A Original B Copy Copy original A. Turn the copy of original A over, and without changing the position of the edge closest to you, insert it in the bypass tray.

  • Page 32: Dual Page Copying

    DUAL PAGE COPYING A dual page original can be automatically separated into two pages during copying. This feature is convenient for making copies of books and other dual page originals on individual sheets of paper. Original Copy • A4 paper is used for dual page copying. Note •...

  • Page 33: Interrupting A Copy Run

    INTERRUPTING A COPY RUN (Interrupt copying) A copy run can be temporarily interrupted to allow another copy job to be performed. When the other job is finished, the copy run will resume using the original copy settings. Note Interrupt copying is not possible when the user programs are being configured, or scanning is being performed. Press the [INTERRUPT] key ( ) to When the copy job is finished, press...

  • Page 34: Functions

    Chapter 3 PRINTER/SCANNER FUNCTIONS The machine includes a USB 1.1 port and a parallel port as standard equipment. A computer can be connected to these ports to use the machine as a printer or a scanner. To use the machine as a printer or scanner, the printer driver or scanner driver must first be installed as explained in the "Software Setup Guide".

  • Page 35: Machine

    PRINTER/SCANNER FUNCTIONS Pausing a print job To pause a print job during printing, press the [ON LINE] key ( ) on the operation panel to switch the machine off-line. Printing will be paused and the ON LINE indicator ( ) will blink. To cancel a print job, press the [CLEAR] key ( ) or the [CLEAR ALL] key ( To resume printing, press the [ON LINE] key ( ) to switch the machine online.

  • Page 36: G Scanning From Your Computer

    PRINTER/SCANNER FUNCTIONS Press a [SCAN MENU] key to begin • To return to copy mode from scanner Note scanning. mode, press the [SCAN] key ( ) or [CLEAR ALL] key ( • For limitations on copying and printing in scanner mode, and scanner mode while copying or printing, see "OPERATION IN COPY, PRINTER, AND SCANNER MODES".

  • Page 37: Operation In Copy, Printer, And Scanner Modes

    OPERATION IN COPY, PRINTER, AND SCANNER MODES Some operations cannot be performed simultaneously when the machine is being used in printer mode, copy mode, or scanner mode. Scanning from a Scanning from Modes Copying Printing computer the machine Copy key input Copy During copying Yes*...

  • Page 38: User Settings

    Chapter 4 USER SETTINGS This chapter explains how to set the automatic exposure level, toner save mode, and the user programs, which are custom settings that control fine points of the machine’s operation. ADJUSTING THE AUTOMATIC EXPOSURE LEVEL The exposure level used in automatic exposure adjustment, which automatically adjusts the copy exposure according to the original, can be adjusted.

  • Page 39: Enabling Toner Save Mode

    ENABLING TONER SAVE MODE Toner save mode can be enabled to reduce toner consumption by about 10%. Press the [AUTO/TEXT/PHOTO] key ) to select "TEXT" AUTO Hold down the [AUTO/TEXT/PHOTO] key ( ) until the PHOTO AUTO indicator ( ) blinks. The exposure level indicators show the AUTO...

  • Page 40: Customising Settings

    CUSTOMISING SETTINGS (User programs) The user programs allow you to customise the machine to match your needs. USER PROGRAMS Setting codes Program Program name (factory default setting Explanation number appears in bold) 1: OFF • "Auto clear time" automatically returns the 2: 10 sec.
  • Page 41 1: AUTO Default exposure • Use this program to set "AUTO", "TEXT", or 2: TEXT mode "PHOTO" as the default exposure mode. 3: PHOTO AL-1633 is as follows: 1: Paper tray (factory default), 5: Bypass tray...

  • Page 42: G Selecting A Setting For A User Program

    USER SETTINGS SELECTING A SETTING FOR A USER PROGRAM Hold down the [Light] key ( ) until Enter the desired setting code by the alarm indicators ( pressing a numeric key. blink. • For the setting codes, see "USER The display shows "- -" PROGRAMS".

  • Page 43: Settings For Auditing Mode

    SETTINGS FOR AUDITING MODE AUDITING MODE When "Auditing mode" is enabled, a count is kept of the number of copies made by each account (up to 20 accounts can be established), and the counts can be displayed and totalled as necessary. In "Auditing mode", the display shows "- - -", and this indicates that a 3-digit account number must be entered in order to use the machine for copying.

  • Page 44: G Selecting Auditing Mode Settings

    USER SETTINGS SELECTING AUDITING MODE SETTINGS Hold down the [Light] key ( ) until Press the [Light] key ( ) to complete the alarm indicators ( the settings. blink. The alarm indicators ( ) go off and the display returns to the number of copies The display shows "- -"...

  • Page 45: Auditing Mode

    USER SETTINGS Auditing mode Account number deletion (program No.10) (program No.13) 1 Press the [1] key to enable "Auditing Use this procedure to delete account numbers. A mode" or the [0] key to disable it, and then single account number can be deleted, or all account press the [START] key ( numbers at once.

  • Page 46: Resetting Account

    USER SETTINGS Resetting account Copying when "Auditing mode" is enabled (program No.15) The copy count of a single account or all accounts can When "Auditing mode" is enabled, "- - -" appears in the be reset to 0. If no account numbers have been display.

  • Page 47: Troubleshooting

    Chapter 5 TROUBLESHOOTING This chapter describes troubleshooting and misfeed removal. TROUBLESHOOTING If you experience difficulty using the machine, check the following troubleshooting guide before calling for service. Many problems can be easily resolved by the user. If you are unable to solve the problem using the troubleshooting guide, turn off the power switch and unplug the machine, and contact your authorised service representative.

  • Page 48: G Machine/Copying Problems

    TROUBLESHOOTING MACHINE/COPYING PROBLEMS The following problems are related to the general operation of the machine and copying. Problem Cause and solution Page The machine is not plugged into a power outlet. – → Plug the machine into a grounded outlet. Power switch OFF.

  • Page 49: Paper Misfeed

    TROUBLESHOOTING Problem Cause and solution Page Misfeed occurs. → To remove the misfeed, see "MISFEED REMOVAL". The paper is outside of the specified size and weight range. → Use copy paper within the specified range. Paper curled or damp. → Do not use curled or crimped paper. Replace with dry copy paper. –...

  • Page 50: Copies Are Smudged Or Dirty

    TROUBLESHOOTING Problem Cause and solution Page The document glass or the underside of the document cover/SPF is dirty. → Clean regularly. Copies are smudged or dirty. Original smudged or blotchy. – → Use a clean original. The scanner glass in the SPF is dirty. →...

  • Page 51: G Printing And Scanning Problems

    – select "Settings" and then click "Printers".) 2 The "SHARP AL-XXXX" printer driver icon is not shown (where XXXX is the model name of your machine). 3 If the icon is shown but you still cannot print, the printer driver may not have been installed correctly.

  • Page 52: Printing Is Slow

    TROUBLESHOOTING Problem Cause and solution Page Simultaneous use of two or more application software programs. Printing is slow. – → Start printing after quitting all unused application software programs. The paper is loaded so that printing takes place on the back side of the paper.

  • Page 53: Poor Scanning Quality

    TROUBLESHOOTING Problem Cause and solution Page The document glass or the underside of the document cover/SPF is dirty. → Clean regularly. The original is smudged or blotchy. – → Use a clean original. You have not specified a suitable resolution. →...

  • Page 54: Unable To Scan The Image

    TROUBLESHOOTING Problem Cause and solution Page If scanning is not possible, shut down your computer, turn off the machine’s power switch, and unplug the machine’s power cord. Next, start your computer, restore – power to the machine, and try scanning again. If scanning is still not possible, check the following items.

  • Page 55: Indicators And Display Messages

    INDICATORS AND DISPLAY MESSAGES If one of the following indicators lights up or one of the following messages appears in the display, check the meaning of the indicator or message in the following table and take appropriate action. TD cartridge replacement Drum cartridge replacement required indicator required indicator Display...

  • Page 56: Misfeed Removal

    The paper may tear when you remove a misfeed. In this event, be sure to remove all torn pieces of paper from the Note machine, taking care not to touch the drum cartridge (the green part). Any scratches or damage to the surface of the drum will cause dirty copies. AL-1644 AL-1633 (p.54) (p.55) (p.55) (p.59) MISFEED IN THE SPF (only on the SPF model) Remove the misfed original.

  • Page 57: G Misfeed In The Bypass Tray

    TROUBLESHOOTING Return the originals indicated by the Section C minus number in the display to the Remove the misfed original from the exit area. document feeder tray and press the [START] key ( Copying will resume from the originals that still remained when the misfeed occurred.

  • Page 58: G Misfeed In The Machine

    TROUBLESHOOTING MISFEED IN THE MACHINE Open the bypass tray and the side Check the misfeed location. Remove cover. the misfed paper following the instructions for each location in the illustration below. If paper is misfed here, go to "B. Misfeed in the fusing area". If the misfed paper is visible here, go to "C.
  • Page 59 TROUBLESHOOTING B. Misfeed in the fusing area Push gently on both ends of the front Lift the fusing unit release levers, to cover and open it. return them to their operating position. Turn the roller rotating knob in the direction of the arrow. Close the front cover and side cover.
  • Page 60 TROUBLESHOOTING C. Misfeed in the transport area Open the fusing paper guide by pressing down the projection on either side of the guide and remove the misfed paper. Be careful not to tear the misfed paper during removal. The fusing unit is hot. Do not touch Warning the fusing unit when removing misfed paper.

  • Page 61: Misfeed In The Upper Paper Tray

    TROUBLESHOOTING MISFEED IN THE UPPER PAPER TRAY Note Make sure that there is no misfed paper in the tray before pulling it out. (p.56) Lift and pull out the upper paper tray and remove the misfed paper. Be careful not to tear the misfed paper during removal.

  • Page 62: G Misfeed In The Lower Paper Tray

    TROUBLESHOOTING MISFEED IN THE LOWER PAPER TRAY (Two-tray model only) Note Make sure that there is no misfed paper in the tray before pulling it out. (p.56) Open the lower side cover. Close the lower paper tray. Grasp the handle to open the lower side cover.

  • Page 63: Replacing The Td Cartridge

    REPLACING THE TD CARTRIDGE When the TD cartridge replacement required indicator ( ) lights up, the TD cartridge will need replacement soon. Obtain a new cartridge. When the TD cartridge replacement required indicator ( ) blinks, the TD cartridge must be replaced before copying can be resumed.

  • Page 64: Replacing The Drum Cartridge

    TROUBLESHOOTING Close the front cover. • Before closing the front cover, make sure Note that the TD cartridge is correctly installed. • When closing the front cover, gently hold The TD cartridge both ends. replacement required indicator ( ) will go out.
  • Page 65 TROUBLESHOOTING Remove the new drum cartridge from the protective bag and gently insert the lead end of the drum cartridge along the guides. Do not touch the drum cartridge (green portion). Doing so may damage the drum and Caution cause smudges on copies. Remove the protective cover from the drum cartridge and then push the cartridge all the way into the machine.

  • Page 66: Routine Maintenance

    Chapter 6 ROUTINE MAINTENANCE This chapter explains how to keep the machine operating smoothly, including viewing copy count, and scan count, the toner level indicator or drum cartridge life, and cleaning the machine. CHECKING THE TOTAL OUTPUT COUNT CHECKING THE TOTAL OUTPUT COUNT From the "0"...

  • Page 67: Checking The Toner Level And Drum Cartridge Life

    CHECKING THE TONER LEVEL AND DRUM CARTRIDGE LIFE TONER LEVEL DRUM CARTRIDGE LIFE The toner level is indicated by a 6-level display. Use it To find out how many more copies can be made as a guideline for replacing the TD cartridge. before the 30,000 mark is reached, follow the procedure described below.

  • Page 68: Routine Maintenance

    ROUTINE MAINTENANCE CLEANING THE DOCUMENT GLASS AND SPF/ DOCUMENT COVER If the document glass, SPF underside of the document cover, or the scanner for originals coming from the SPF (the long narrow glass surface on the right side of the document glass) become dirty, the dirt may appear on copies. Always keep these parts clean.

  • Page 69: Cleaning The Transfer Charger

    ROUTINE MAINTENANCE CLEANING THE TRANSFER CHARGER If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean the charger using the following procedure. Turn the power switch off. Return the charger cleaner to its original position. Close the upper paper tray.

  • Page 70: Supplies

    Standard supplies for this product that are to be replaced by the user are paper, TD cartridge and drum cartridge. For best copying results, be sure to use only SHARP products. Only genuine SHARP consumables carry the Genuine Supplies label.

  • Page 71: Moving Instructions

    MOVING INSTRUCTIONS When moving this machine, follow the procedure below. Note When moving this machine, be sure to remove the TD cartridge in advance. Turn the power switch off and Use a coin (or suitable object) to disconnect the power cord. attach to the left side of the machine the screw that has been stored in the Push on both ends of the front cover...

  • Page 72: Specifications

    Chapter 8 APPENDIX SPECIFICATIONS Model AL-1633 AL-1644 Type Digital Multifunction System, Desktop Photoconductive type OPC drum Document glass type Fixed Copy system Dry, electrostatic transfer Originals Sheets, bound documents Original sizes Max. A3 Max. A3 Min. A6 (A6 must be fed from the bypass tray) Copy size Image loss: Max.

  • Page 73: Printer Function

    Print speed 12 ppm Resolution 600 dpi Memory 16 MB Emulation SHARP GDI IEEE1284 parallel port/ Interface USB port (USB1.1) [Parallel cable] Shielded bi-directional (IEEE1284) cable (max. length 3 m (10 feet)) Interface cables Please purchase a commercially available parallel cable.

  • Page 74: Scanner Function

    Shielded twisted pair cable (max. length 3 m (10 feet)) * The resolution may be enhanced by the scanner driver depending on the scanned area and colour mode. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification Note changes for product improvement without prior notice.

  • Page 75: Software License

    (the "Software") and related documentation are licensed to you by SHARP. You own the disk on which the Software is recorded but SHARP and/or SHARP's Licensors retain title to the Software and related documentation. This License allows you to use the Software on one or more computers connected to a single printer and make one copy of the Software in machine-readable form for backup purposes only.
  • Page 76 Clause 6. A disk will be replaced when it is returned to SHARP or a SHARP authorized representative with a copy of the receipt. SHARP will have no responsibility to replace a disk damaged by accident, abuse or misapplication.
  • Page 77 INDEX Symbols ] key........11, 28, 33, 34, 71 Dark indicator ........... 10, 24 ] key............11, 71 Dark key ..........10, 24, 36, 37 Differences between models ........6 Display ............. 10, 33 About the operation manuals Document cover ........8, 21, 23, 66 - Online Manual............
  • Page 78 Normal copying SCAN indicator..........10, 33 - Document glass ..........21 SCAN key........... 10, 33, 34 - SPF ..............22 SCAN MENU key ........10, 33, 34 Numeric keys ........11, 25, 40, 42 Scanning from your computer ........ 34 Scanning using the keys on the machine....
  • Page 79 INDEX BY PURPOSE Copying Automatic ratio selection ......... 25 Cancelling a copy run........21, 22 Copying, starting ..........21, 22 Dual page copying ..........30 Enlargement/reduction ..........25 Exposure adjustment ..........24 Exposure selector ........... 24 Interrupt copying ............. 31 Manual ratio selection ..........
  • Page 80 MEMO...
  • Page 81 MEMO...
  • Page 82 LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT CLASS 1 LASER PRODUCT LASER KLASSE 1...

  • Page 84: Sharp Corporation

    AL-1633/AL-1644 SHARP CORPORATION PRINTED IN CHINA 2004E Printed on 100% post-consumer recycled paper TINSE1164QSZ1...

This manual is also suitable for:

Al-1644

Table of Contents