Connecting To The Computer - Sharp AL-1035-WH Operation Manual

CONNECTING TO THE COMPUTER

Connect the machine to your computer according to the following steps.
Connecting the cable
USB cable
Shielded pair cable with high-speed transmission.
If a USB 2.0 interface is used for connecting the machine, please use a USB cable that supports USB 2.0.
USB is available with a PC that is configured with a USB driver and preinstalled with Windows 2000, Windows XP,
Caution
Windows Vista or Windows 7.
Connecting the USB cable
1
Insert the cable into the USB interface
of the machine.
System requirement of USB 2.0 (for high-speed mode)
If the computer is preinstalled with a Microsoft USB 2.0 driver or installed with a USB 2.0 driver for Windows 2000/XP/Vista/7
through "Windows Update", the USB 2.0 interface of the machine is able to transmit data at the standard speed of USB 2.0
(high speed).
2
Insert the other end of the cable into
the USB interface of your computer.
3
4
5
6
7
8
9
10
11
14
BEFORE USING THE MACHINE