Table of Contents
Advertisement
CONNECTING TO A COMPUTER
Follow the procedure below to connect the machine to your computer.
Interface cables for connecting the machine to your computer are not included with the machine. Please purchase
the appropriate cable for your computer.
Interface cable
USB cable
Shielded twisted pair cable, high-speed transmission equivalent (3 m (10 feet) max.)
Parallel cable
IEEE 1284-Shielded type bi-directional parallel interface cable (3 m (10 feet) max.)
• If you intend to use the machine as a scanner, it must be connected to your computer with a USB interface
Caution
cable. The scanner function cannot be used if the machine is connected with a parallel cable.
• USB is available with a PC/AT compatible computer that was originally equipped with USB and had Windows 98,
Windows Me, Windows 2000 Professional, Windows XP Professional or Windows XP Home Edition preinstalled.
• Do not connect the interface cable before installing the MFP driver. The interface cable should be connected
during installation of the MFP driver.
CONNECTING A USB CABLE
1
Insert the cable into the USB connector
on the machine.
CONNECTING A PARALLEL CABLE
1
Ensure that your computer and the
machine are turned off.
2
Plug the cable into the parallel
connector on the machine, and fasten
with the clasps.
10
2
Insert the other end of the cable into
the your computer's USB connector.
3
Plug the other end of the cable into
your computer's parallel connector.
Advertisement
Table of Contents
