EverFocus EPTZ9200 Series Quick Installation Manual page 18

• Using the RS-485 wire
EKB500 RS-485 PORTS:
PIN3: RS-485+
PIN6: RS-485-
2. Connect a monitor to the video cable of the EPTZ camera.
3. Connect the power to EKB500 (12 VDC), and the power to EPTZ camera (24 VAC~).
After complete the above connection, you can start operating EPTZ camera with EKB500 Keyboard:
IRIS Focus
+ F.
- N.
1. Move the Joystick up / down / left / right to shift the camera view in that direction.
2. Twist the top of the Joystick to zoom in / out.
3. Press the Zoom In / Out, Focus F. / N. or IRIS + / - to manually operate these functions.
4. To enter the OSD menu of the EPTZ camera, press both of the Menu and CAM keys at the same time.
Zoom
In
Out
LEFT
17
EPTZ9200/9300 Series
UP
Zoom OUT Zoom IN
RIGHT
DOWN