EverFocus EPTZ9200 Series Quick Installation Manual page 14

9. Screw the housing cover to the top housing slowly by twisting it clockwise.
Note: When you turn on the power, the camera will enter self-inspection mode and run a self-testing
program. Once this is complete, you will be able to operate it via EKB500 or other control device.
Ceiling Mount Installation
It is required to use the optional In-ceiling Mount Bracket (Recessed Mount Bracket) and Surface Ring to
attach the camera to the ceiling for supporting the camera's weight. Make sure the ceiling is strong enough
to easily support the weight of the bracket and the camera.
1. Replace the desiccant bags inside the top housing. See
2. Cut a hole on the ceiling using the supplied template.
Replacing the Desiccant Bags.
13
EPTZ9200/9300 Series