Advertisement
70
V. FRAME
8. Carefully pull out the engine stop switch and turo signal
switch wires from the steering handlebar.
Fig. 5-30 Removing switch leads
Steering stem
1. Remove the front wheel and cali per assembly.
2. Remove the steering handlebar.
3. Remove the headlight case by loosening off the reflectors
and case mounting bolts.
Fig. 5-31
(1) Reflector (2) Bolt
4. Disconnect the tachometer and speedometer cables at the
meters.
5. Remove the nuts and take out the tachometer and
speedometer.
6. Disconnect the harness connector from the main switch and
remove the main switch.
7. Disconnect the front stop leads at the stop switch. Loosen
off the bolts and remove the brake hose assembly from the
steering sterno
Fig. 5-32
(1) Trachometer
(4) Main switch connector
(2) Speedometer cable (5) Brake base
(3) Meter securing nut
8. Remove the steering stem nut and loosen the fork top
bridge bolt; take out the fork top bridge.
9. Remove the front forks.
lV
.
.
I
;i
Fig. 5-33
(l) Steering stem nut
(2) Bolt
(3) Fork top bridge
Advertisement
