Table of Contents
Advertisement
Level unit
This procedure will level the unit by evenly adjusting the weight on the rear feet. Leveling the unit will eliminate rocking during
use.
NOTE: References to left and right are from the users perspective during use.
1.
Verify foot plates are completely stopped.
2.
Grasp one of the rear covers and slowly lift the rear foot off the floor. Lower rear foot to the floor.
3.
Grasp the other rear cover and slowly lift the rear foot off the floor. Lower rear foot to the floor.
Make note of either rear foot lifting off the floor easier than the other.
If both rear feet lift off the floor evenly, secure both leveling foot jam nuts against the frame post using a 9/16" open-end
wrench. Unit is leveled.
Left leveling foot shown
1
2
3
4
1
2
3
4
Turn counter-clockwise to secure
Page 9 of 29
Description
Rear cover
Lift here
Left rear foot
Right rear foot
Description
Frame post
Jam nut
Leveling foot
Qty.
2
2
1
1
Qty.
1
1
1
1
Advertisement
Table of Contents
