Table of Contents
Advertisement
4.
Tighten screw to a minimum of 90 in/lbs.
Verify handle assemblies are now installed in the correct position.
Install contact heart rate cable
1.
Plug right heart rate cable into main frame socket.
Position plug so handle does not rub cable during operation.
2.
Plug left heart rate cable into main frame socket.
Position plug so handle does not rub cable during operation.
Verify heart rate cables do not rub on handle during operation.
Install foot pads
Have one person lift the unit while a second person places a foot pad under each of the two back feet.
1
2
1
2
Page 27 of 29
Description
Left handle assembly
Right handle assembly
Description
Main frame socket
Heart rate wire
Qty.
1
1
Qty.
1
1
Advertisement
Table of Contents
