Table of Contents
Advertisement
Install power cord
1.
Place a 4" (10 cm) block under unit to elevate right side.
2.
Plug power cord into power cord inlet.
3.
Install two screws securing mounting bracket using a stubby Phillips screwdriver.
4.
Remove block.
Visually inspect unit
1.
Remove any packing material from unit.
2.
Examine the unit to ensure that the assembly is correct and complete.
Level unit
1.
Move unit to final location.
2.
Perform
Level unit
procedure to level unit and eliminate rocking.
1
1
2
3
4
Page 28 of 29
Description
Foot pads
Description
Power cord inlet
Power cord
Mounting bracket
Screws
Qty.
2
Qty
1
1
1
2
Advertisement
Table of Contents
