Life Fitness Elevation GSC Assembly Instructions Manual page 26

9. Rotate right handle assembly 180 degrees.
10. Apply Loctite to threads inside the pivot pin and screw.
11. Place right handle assembly in position and slide pivot pin assembly back in place.
12. Install the screw and washer to the right handle assembly using two 7/32" Allen wrenches.
Install left linkage rod
1. Pivot left handle assembly up and slide left linkage rod onto left arm.
2. Place a drop of Loctite onto the screw.
3. Install the screw, washer, linkage rod cap, and flange spacer using a 3/16" Allen wrench.
4. Tighten screw to a minimum of 90 in/lbs.
Install right linkage rod
1. Pivot right handle assembly up and slide left linkage rod onto left arm.
2. Place a drop of Loctite onto the screw.
3. Install the screw, washer, linkage rod cap, and flange spacer using a 3/16" Allen wrench.
1
2
3
4
5
6
7
1
2
3
4
5
6
7
Page 26 of 29
Description
Linkage rod cap
Screw
Loctite
Washer
Flange spacer
Left arm
Left linkage rod
Description
Right linkage rod
Right arm
Flange spacer
Linkage rod cap
Washer
Loctite
Screw
Qty.
1
1
1
1
1
1
1
Qty.
1
1
1
1
1
1
1